Product no. RF-300
SF6 Regeneration System
Medium to large SF6 recovery and regeneration system with PLC control, purification, circulation purification, and refilling functions.
Key Product Data
- Gas
- SF6
- Recovery speed
- 150 kg/h max.
- Vacuum compressor
- 15 m3/h
- Vacuum pump
- 64 m3/h
- Final vacuum
- <= 10 Pa
- Regenerated purity
- >= 99.9%
- Air content after treatment
- <= 0.03%
- Moisture after treatment
- <= 40 ppmv
Product Overview
The RF-300J SF6 Regeneration System is a medium to large SF6 recovery and purification unit. It supports vacuum evacuation, SF6 recovery, gas purification, circulation purification, and gas refilling.
The system uses PLC intelligent control and touch screen operation. It is designed for power utilities, electrical equipment manufacturers, metallurgy, petrochemical plants, gas suppliers, and SF6 filling stations.
Recovered SF6 gas can be regenerated and purified for reuse. After treatment, the gas can reach new-gas quality requirements according to GB12022-2014.
Product Advantages
- PLC intelligent control with touch screen operation makes operation simple and safe
- Molecular sieve regeneration and refrigeration circulation purification improve gas purity
- Treated SF6 gas purity can reach 99.9% and meet GB12022-2014 new-gas standard
- Oil-free compressor and independent recovery/refilling pipelines help avoid cross contamination
- Negative-pressure deep recovery starts automatically when recovery pressure drops to 0.08 MPa
- Two refilling ports support direct filling and pressure-boosted filling
- Tank weighing sensor shows gas weight changes in real time for easier gas management
- Suitable for -10 C to +40 C site environments with relative humidity below 90% RH
Technical Specifications
35 parameters- Gas
- SF6
- Recovery speed
- 150 kg/h max.
- Vacuum compressor
- 15 m3/h
- Vacuum pump
- 64 m3/h
- Final vacuum
- <= 10 Pa
- Regenerated purity
- >= 99.9%
- Air content after treatment
- <= 0.03%
- Moisture after treatment
- <= 40 ppmv
- CF4 after treatment
- <= 0.01%
- Storage tank
- 320 L
- Power
- 20 kW
- Power supply
- 380 V +/- 10%, 50/60 Hz
- Model
- RF-300J
- Type
- SF6 recovery and regeneration system
- Function
- Vacuum evacuation / recovery purification / circulation purification / refilling
- Dimensions
- 2400 mm x 1400 mm x 1956 mm
- Weight
- 1800 kg
- Control
- PLC intelligent control with touch screen operation
- Tank working pressure
- 3.7 MPa
- Recovery inlet pressure
- < 0.6 MPa
- Filling speed
- 80 kg/h max.
- Refilling pressure
- < 3.5 MPa
- Annual leakage rate
- < 1%
- Noise
- < 75 dB(A)
- Ambient temperature
- -10 C to +40 C
- Humidity
- < 90% RH, non-condensing
- Dust filtration accuracy
- < 1 um
- Standard
- GB12022-2014 new-gas standard
- Recovery mode
- Recover to purification tank first, or recover to external cylinder
- Refilling modes
- Direct pressure-difference filling or boosted filling
- System control
- PLC intelligent control and touch screen operation
- Purification system
- Molecular sieve regeneration filter and refrigeration circulation purification
- Pipeline design
- Independent recovery and refilling pipelines to reduce cross contamination
- Measurement system
- Storage tank weighing sensor for real-time gas weight display
- Refilling ports
- 2 ports for direct filling and pressure-boosted filling
Application and Selection Checklist
This product is listed for gas regeneration. Before selection, provide the following project information so the configuration can be reviewed against the actual operating conditions.
- Gas composition and operating conditions
- Required range, capacity, flow, or response
- Power supply, interfaces, and installation space
- Site environment and destination country
- Quantity, schedule, and operating workflow
- Required standards, drawings, tests, and certificates
Standards, Documentation, and Project Fit
Product suitability is determined by the selected model, configuration, operating conditions, interfaces, and destination requirements. A matching product in the same group is not automatically interchangeable.
Standards, declarations, calibration records, inspection documents, drawings, manuals, commissioning, training, and test scope vary by product and contract. State every required item in the inquiry and confirm it in writing before purchase.
Typical application descriptions on this page are selection references, not claims about a named customer installation. Final project fit requires review of the actual site data.
Frequently Asked Questions
What is SF6 Regeneration System used for?
SF6 Regeneration System is intended for gas regeneration. Medium to large SF6 recovery and regeneration system with PLC control, purification, circulation purification, and refilling functions.
Which product group does RF-300 belong to?
RF-300 is listed in the SF6 Service carts product group within the SF6 range.
What should be confirmed before selecting RF-300?
Confirm the application, gas conditions, required performance, utilities, connection interfaces, site environment, quantity, destination, and required technical documents.
Are standards and certificates available for RF-300?
Applicable standards, declarations, calibration or inspection records, and certificate availability depend on the selected model and destination. Confirm required documents in writing during the inquiry.
Related Selection Guides and Products
Product Images
1 image